20in Hand Saws

Special Offer (RRP: £14.09)

Jack universal handsaw with, two component handle for user comfort, quality thicker , stronger , wider steel blade and double-ground hard-point teeth for maximum control

Length: 20in

Teeth: 7 per inch
Point: 8 per inch

A universal handsaw offering all round cutting performance, ideally suited for softwoods and board material.
The 1mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth 8TPI for ultimate cutting performance.
The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.
Suitable for cutting the following timber:-
Hardwood
Softwood
Rough Timber
Board Sheet
Worktop
Floorboard
Melamine

Ideally suited for cutting hardwood, and for accurate finishing cuts.
The 1mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth 10TPI for ultimate cutting performance.
The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.
Suitable for cutting the following timber:-
Hardwood
Softwood
Board Sheet
Worktop
Dowel
Skirting board
Architrave
Floorboard
Melamine

A universal handsaw offering all round cutting performance, ideally suited for softwoods and board material.
The 1mm thick rigid nose PTFE coated blade is designed to offer maximum blade stability and features triple ground teeth 8TPI for ultimate cutting performance.
The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.
Suitable for cutting the following timber:-
Hardwood
Softwood
Rough Timber
Board Sheet
Worktop
Floorboard
Melamine

Ideally suited for cutting hardwood, and for accurate finishing cuts.
The 1mm thick rigid nose PTFE coated blade is designed to offer maximum blade stability and features triple ground teeth 10TPI for ultimate cutting performance.
The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.
Suitable for cutting the following timber:-
Hardwood
Softwood
Board Sheet
Worktop
Dowel
Skirting board
Architrave
Floorboard
Melamine

Hand saw with the following features - Bi-material handle for user comfort, Integral 45 and 90 degrees angles built into handle, universal tooth cuts with and across the grain and hard point teeth for longer life. Length - 20 Inch (500mm) Teeth - Universal ( Hard point) 8PPI

Hardened teeth ground on three edges for faster, easier cutting.

Fitted with a Bi-material handle which is welded and screwed for comfort and security.

Length 500mm/20in

8 TPI

Bi-material handle screwed and ultrasonically welded for comfort and security. Teeth are precision set to generate clearance for the blade to cut on both the forward and back stroke increasing cutting efficiency by 30%. 3 sided precision ground teeth offer razor sharp cutting edges at every stage of the stroke Induction hardened teeth stay sharper twice as long. 7tpi 20in - 500mm

Hardened teeth ground on three edges for faster, easier cutting.

Fitted with a Bi-material handle which is welded and screwed for comfort and security.

Length 500mm/20in

11TPI

Bi-material handle screwed and ultrasonically welded for comfort and security. Teeth are precision set to generate clearance for the blade to cut on both the forward and back stroke increasing cutting efficiency by 30%. 3 sided precision ground teeth offer razor sharp cutting edges at every stage of the stroke. Induction hardened teeth stay sharper twice as long. A 20in Fatmax fine cut handsaw.