Jack universal handsaw with, two component handle for user comfort, quality thicker , stronger , wider steel blade and double-ground hard-point teeth for maximum control
Length: 22in
Teeth: 7 per inch
Point: 8 per inch
|
 |
Hardpoint handsaw with soft grip for user comfort. The fine toothing gives a superior finish. Ideal for cutting plywood, chipboard and other man-made materials.
Length 22in
Teeth 9 tpi
Point 10 ppi
|
|
Hardpoint fleam toothed handsaw with soft grip for user comfort. The ideal jobbing builders saw.
Length 22in
Teeth 7 tpi
Point 8 ppi
|
|
A universal handsaw offering all round cutting performance, ideally suited for softwoods and board material.
The 1mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth 8TPI for ultimate cutting performance.
The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.
Suitable for cutting the following timber:-
Hardwood
Softwood
Rough Timber
Board Sheet
Worktop
Floorboard
Melamine
|
|
A coarse tooth handsaw ideally suited for laminated boards, plasterboard and fast ripping cuts.
The 1mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth 8TPI for ultimate cutting performance. Deep gullets positioned along the cutting edge further enhance the cutting performance through greater volume removal of waste material.
The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.
Suitable for cutting the following timber:-
Hardwood
Softwood
Rough Timber
Board Sheet
Plasterboard
Worktop
|
|
Ideally suited for cutting hardwood, and for accurate finishing cuts.
The 1mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth 10TPI for ultimate cutting performance.
The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.
Suitable for cutting the following timber:-
Hardwood
Softwood
Board Sheet
Worktop
Dowel
Skirting board
Architrave
Floorboard
Melamine
|
|
A universal handsaw offering all round cutting performance, ideally suited for softwoods and board material.
The 1mm thick rigid nose PTFE coated blade is designed to offer maximum blade stability and features triple ground teeth 8TPI for ultimate cutting performance.
The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.
Suitable for cutting the following timber:-
Hardwood
Softwood
Rough Timber
Board Sheet
Worktop
Floorboard
Melamine
|
|
Ideally suited for cutting hardwood, and for accurate finishing cuts.
The 1mm thick rigid nose PTFE coated blade is designed to offer maximum blade stability and features triple ground teeth 10TPI for ultimate cutting performance.
The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.
Suitable for cutting the following timber:-
Hardwood
Softwood
Board Sheet
Worktop
Dowel
Skirting board
Architrave
Floorboard
Melamine
|
|
A coarse tooth handsaw ideally suited for laminated boards, plasterboard and fast ripping cuts.
The 1mm thick rigid nose PTFE coated blade is designed to offer maximum blade stability and features triple ground teeth 8TPI for ultimate cutting performance. Deep gullets positioned along the cutting edge further enhance the cutting performance through greater volume removal of waste material.
The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.
Suitable for cutting the following timber:-
Hardwood
Softwood
Rough Timber
Board Sheet
Plasterboard
Worktop
|
|
A coarse tooth handsaw ideally suited for laminated boards, plasterboard and fast ripping cuts. The 1mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth 8TPI for ultimate cutting performance. Deep gullets positioned along the cutting edge further enhance the cutting performance through greater volume removal of waste material. The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety. Suitable for cutting the following timber:- Hardwood, Softwood, Rough Timber, Board Sheet, Plasterboard, Worktop. Includes an Irwin Jabsaw with Holster.
|
|
Hand saw with the following features - Bi-material handle for user comfort, Integral 45 and 90 degrees angles built into handle, universal tooth cuts with and across the grain and hard point teeth for longer life. Length - 22 Inch (550mm) Teeth - Universal ( Hard point) 8PPI
|
|
Hardened teeth ground on three edges for faster, easier cutting.
Fitted with a Bi-material handle which is welded and screwed for comfort and security.
Length 550mm/22in
8TPI
|
|
Hardened teeth ground on three edges for faster, easier cutting.
Fitted with a Bi-material handle which is welded and screwed for comfort and security.
Length 550mm/22in
11TPI
|
|
|
|
|
|
Bi-material handle screwed and ultrasonically welded for comfort and security teeth are precision set to generate clearance for the blade to cut on both the forward and back stroke increasing cutting efficiency by 30%. 3 sided precision ground teeth offer razor sharp cutting edges at every stage of the stroke. Induction hardened teeth stay sharper twice as long.
|
|
Bi-material handle screwed and ultrasonically welded for comfort and security. Teeth are precision set to generate clearance for the blade to cut on both the forward and back stroke increasing cutting efficiency by 30%. 3 sided precision ground teeth offer razor sharp cutting edges at every stage of the stroke Induction hardened teeth stay sharper twice as long. 7tpi 22in - 550mm
|
|
