Dale high quality tubular latches with bolt through fixing holes, suitable for the Dale arc designer lever range. Featuring guided latch bolts and two part forends.
Latch in SSS - satin stainless steel (image for illustration purposes only and may not be actual finish)
|
 |
Dale high quality tubular latches with bolt through fixing holes, suitable for the Dale arc designer lever range. Featuring guided latch bolts and two part forends.
Latch in PSS - polished stainless steel (image for illustration purposes only and may not be actual finish)
|
|
Dale high quality tubular latches with bolt through fixing holes, suitable for the Dale arc designer lever range. Featuring guided latch bolts and two part forends.
Latch in PEB - polished electro brass (image for illustration purposes only and may not be actual finish)
|
|
Legge 3721 - 64mm Tubular Latch
(image for illustration purposes only)
Case Size: 64mm
Follower: 8mm
Case Finish: Zinc Plated
Forend Finish: Nickel Plated
Case Depth: 64mm
Backset: 44mm
Case Height: 22mm
Forend Length: 57mm
Forend Width: 25mm
OPERATION
Latchbolt is withdrawn by lever handle from either side.
|
|
Legge 3721 - 64mm Tubular Latch
Case Size: 64mm
Follower: 8mm
Case Finish: Zinc Plated
Forend Finish: Brass
Case Depth: 64mm
Backset: 44mm
Case Height: 22mm
Forend Length: 57mm
Forend Width: 25mm
OPERATION
Latchbolt is withdrawn by lever handle from either side.
|
|
The Union 2648 Mortice latches are suitable for timber doors hinged on the left or right and requiring lever handle operation. Please note these are not suitable for use with unsprung lever handles. Latches with a case size of 64.5mm (2.5 inchs) are suitable for handles with a backset of 44.5/45mm. Latches with a case size of 80mm (3 inches) are suitable for handles with a 57mm backset / Finish: Polished Brass / Case Size: 64mm / Backset: 44.5mm
|
|
The Union 2648 Mortice latches are suitable for timber doors hinged on the left or right and requiring lever handle operation. Please note these are not suitable for use with unsprung lever handles. Latches with a case size of 64.5mm (2.5 inchs) are suitable for handles with a backset of 44.5/45mm. Latches with a case size of 80mm (3 inches) are suitable for handles with a 57mm backset / Finish: Silver Enamel / Case Size: 64mm / Backset: 44.5mm
|
|
The Union 2648 Mortice latches are suitable for timber doors hinged on the left or right and requiring lever handle operation. Please note these are not suitable for use with unsprung lever handles. Latches with a case size of 64.5mm (2.5 inchs) are suitable for handles with a backset of 44.5/45mm. Latches with a case size of 80mm (3 inches) are suitable for handles with a 57mm backset / Finish: Polished Brass / Case Size: 64mm / Backset: 44.5mm
|
|
The Union 2648 Mortice latches are suitable for timber doors hinged on the left or right and requiring lever handle operation. Please note these are not suitable for use with unsprung lever handles. Latches with a case size of 64.5mm (2.5 inchs) are suitable for handles with a backset of 44.5/45mm. Latches with a case size of 80mm (3 inches) are suitable for handles with a 57mm backset / Finish: Silver Enamel / Case Size: 64mm / Backset: 44.5mm
|
|
The Union 2650 rebated mortice latches are suitable for timber doors hinged on the left or right and requiring lever handle operation. Please note these are not suitable for use with unsprung lever handles. These latches are suitable for 13mm rebate. Latches with a case size of 64.5mm (2.5 inchs) are suitable for handles with a backset of 44.5/45mm. Latches with a case size of 80mm (3 inches) are suitable for handles with a 57mm backset. Finish : Electro Brass Case Size: 64mm Backset Size: 44.5mm
|
|
The Yale M888 tubular mortice latches are suitable internal doors where no locking is required. The latch bolt withdrawn by spring lever handle from either side but they are not suitable for unsprung lever handles. Size: 64mm 2.5in / Finish: Polished Brass / Pack: Visi / Pack of 1
|
|
The Yale M888 tubular mortice latches are suitable internal doors where no locking is required. The latch bolt withdrawn by spring lever handle from either side but they are not suitable for unsprung lever handles. Size: 64mm 2.5in / Finish: Zinc Plated / Pack: Single
|
|
The Yale M888 tubular mortice latches are suitable internal doors where no locking is required. The latch bolt withdrawn by spring lever handle from either side but they are not suitable for unsprung lever handles. Size: 64mm 2.5in / Finish: Chrome Finish / Pack: 3
|
|
The Yale M888 tubular mortice latches are suitable internal doors where no locking is required. The latch bolt withdrawn by spring lever handle from either side but they are not suitable for unsprung lever handles. Size: 64mm 2.5in / Finish: Polished Brass / Pack: 3
|
|
The Yale M888 tubular mortice latches are suitable internal doors where no locking is required. The latch bolt withdrawn by spring lever handle from either side but they are not suitable for unsprung lever handles. Size:64mm 2.5in / Finish: Chrome Finish / Pack: Trade / Pack of 20
|
|
The Yale M888 tubular mortice latches are suitable internal doors where no locking is required. The latch bolt withdrawn by spring lever handle from either side but they are not suitable for unsprung lever handles. Size: 64mm 2.5in / Finish: Polished Brass / Pack: Trade / Pack of 20
|
|
The Yale M999 rebated tubular mortice latches are suitable for rebated french doors or internal doors where no locking is required. The latch bolt is withdrawn by spring lever handle from either side but they are not suitable for unsprung lever handles. Polished brass finish. Length: 2.5in 64mm
|
|
