Centre Punches

Centre Punch with a square head which provides a larger striking area and prevents the punch from rolling when laid on the bench.

Carefully hardened and tempered and with a 90º ground point.

Size. 1/16in
Length. 4in.

Centre Punch with a square head which provides a larger striking area and prevents the punch from rolling when laid on the bench.

Carefully hardened and tempered and with a 90º ground point.

Size. 1/4in.
Length. 4in

Centre Punch with a square head which provides a larger striking area and prevents the punch from rolling when laid on the bench.

Carefully hardened and tempered and with a 90º ground point.

Size. 1/8in.
Length. 4in.

Centre Punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench.

Carefully hardened and tempered and with a 90º ground point.

Size. 3/16in.
Length. 4in.

Centre Punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench.
Carefully hardened and tempered and with a 90º ground point.

Size. 3/32in
Length. 4in.

Centre Punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench.

Carefully hardened and tempered and with a 90º ground point.

Size. 5/32in.
Length. 4in

This Centre Punch is ideal for making light indents to heavy punching without using a hammer.
Pressure can be varied from 5lbs to approximately 30lbs simply by rotating the head.

Size 6in / 150mm

The punches have a knurled body to enhance grip and are ideal for making indentations in material to ensure the correct positioning for drilling points.

The twist lock wooden tub allows the punches to be removed and replaced very easily

Contents: one each 1.5, 2, 2.5, 3, 3.5, 4, 5 and 6mm

A precision manufactured Automatic Centre Punch which aids accuracy through the single handed operation which alleviates the need for a hammer. Depth of impression can be adjusted via the screw cap. Length 125mm

Hardened steel punches carefully heat treated for long life. Precisely knurled body with square head which gives a good striking area and prevents the punch from rolling. Size 1/16in. Length 100mm

Hardened steel punches carefully heat treated for long life. Precisely knurled body with square head which gives a good striking area and prevents the punch from rolling. Size 1/4in. Length 100mm

Hardened steel punches carefully heat treated for long life. Precisely knurled body with square head which gives a good striking area and prevents the punch from rolling. Size 1/8in. Length 100mm

Hardened steel punches carefully heat treated for long life. Precisely knurled body with square head which gives a good striking area and prevents the punch from rolling. Size 3/16in. Length 100mm

Hardened steel punches carefully heat treated for long life. Precisely knurled body with square head which gives a good striking area and prevents the punch from rolling. Size 3/32in. Length 100mm

Hardened steel punches carefully heat treated for long life. Precisely knurled body with square head which gives a good striking area and prevents the punch from rolling. Size 5/32in. Length 100mm

Hardened steel punches carefully heat treated for long life. Precisely knurled body with square head which gives a good striking area and prevents the punch from rolling. Walleted set of 4 containing one of each of the following sizes. 1/16, 3/32, 1/8, and 3/16in. Length 100mm

Quality chrome vanadium steel increased strength and durability for retained accuracy when marking out centre lines, hole locations and pilot drill starting points. Quenched and tempered to precise specifications. Type = Centre Punch Size = 1/4in x 4in

Quality chrome vanadium steel increased strength and durability for retained accuracy when marking out centre lines, hole locations and pilot drill starting points. Quenched and tempered to precise specifications. Type = Centre Punch Size = 5/16in x 4.1/2in

Quality chrome vanadium steel increased strength and durability for retained accuracy when marking out centre lines, hole locations and pilot drill starting points. Quenched and tempered to precise specifications. Type = Starter Punch Size = 3/32in x 5.1/2in

Hardened and tempered with a knurled finger grip. Point tips are accurately centered.

Length: 75mm (3 Inch)

Diameter at top of tapered point: 1.5mm (1/16 Inch)

Hardened and tempered with a knurled finger grip. Point tips are accurately centered.

Length: 100mm (4 Inch)

Diameter at top of tapered point: 2mm (5/64 Inch)

Hardened and tempered with a knurled finger grip. Point tips are accurately centered.

Length: 100mm (4 Inch)

Diameter at top of tapered point: 2.5mm (3/32 Inch)

Hardened and tempered with a knurled finger grip. Point tips are accurately centered.

Length: 100mm (4 Inch)

Diameter at top of tapered point: 3mm (1/8 Inch)

Hardened and tempered with a knurled finger grip. Point tips are accurately centered.

Length: 100mm (4 Inch)

Diameter at top of tapered point: 4mm (5/32 Inch)

Rugged steel centre punch has a mechanism which automatically strikes a blow when downward pressure is applied. Force of blow is regulated by the adjustable knurled cap. No hammer is required.

Punch length: 125mm / 5 Inch

Punch diameter: 14mm / 9/16 Inch


Related products:

1. Starrett PTO6690 Point For 18a Centre Punch (Ref: CLE STR18APOINT)

Spare point for the automatic punch STR18A.

Hardened and tempered with a knurled finger grip. Point tips are accurately centered.

Set of all sizes: (1.5mm (1/16 Inch), 2mm (5/64 Inch), 2.5mm (3/32 Inch), 3mm (1/8 Inch), 4mm (5/32 Inch)).