Pin Punch - Sets

These punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes.
The pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch.
The set of four punches include one of each of the following:
3.0mm , 4.0mm , 5.0mm and 6.35mm tip diameters.

Length: 4in / 100mm

Type: Round head parallel Punches

Set of 4

These punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes.
The pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch.
The set of eight punches include one of each of the following.
1.5mm , 2.5mm , 3.0mm , 4.0mm , 5.0mm , 5.5mm , 6.0mm ,and 8mm
(TIP Diameter x 4in long)

Long series pin punch with extended parallel pin, used for the removal of tight pin and metal dowels from mechanical fittings and machinery.

Designed for heavy-duty use and are made from uniformly heat treated tool steel with a round head and a knurled body for a firm grip.

Type: Long series parallel pin punch.

Size: Set 8 1.5, 2.5, 3, 4, 5, 6, 8 and 10mm

Parallel Pin length: 90mm

Overall length: 200mm

The pin punch is used to remove tight pin and metal dowels from mechanical fittings and machinery. Made from uniformly heat treated steel incorporating a round head and a knurled body for a firm grip. 25mm parallel pin length.

Twist lock storage wooden tub allows the punches to be removed and replaced easily.

Set of 8.

Contents: one each 1.5, 2.5, 3, 4, 5, 5.5, 6 and 8mm

Length: 4in / 100mm

Extra long, they are hardened and tempered with a knurled grip. The drive pin sections are 90mm (3 1/2 Inch) long and the diameters of the punches are slightly under the sizes listed.

Length: 200mm / 8 Inch

Set of all sizes in case: (3mm / 1/8 Inch, 5mm / 3/16 Inch, 6mm / 1/4 Inch, 8mm / 5/16 Inch, 9.5mm / 3/8 Inch)

Well proportioned, hardened and tempered with knurled finger grip.

Set of all sizes: (1.5mm (1/16 Inch), 2.5mm (3/32 Inch), 3mm (1/8 Inch), 4mm (5/32 Inch), 5mm (3/16 Inch), 5.5mm (7/32 Inch), 6mm (1/4 Inch), 8mm (5/16 Inch)).

Length: 100mm (4 Inch)

Quality chrome vanadium steel increased strength and durability for retained accuracy when marking out centre lines, hole locations and pilot drill starting points. Quenched and tempered to precise specifications. 6 piece kit