A hardened and tempered parallel pin punch used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the Parallel Punch. Size 1/16in.
|
 |
A hardened and tempered parallel pin punch used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the Parallel Punch. Size 1/4in.
|
|
A hardened and tempered parallel pin punch used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the Parallel Punch. Size 1/8in.
|
|
A hardened and tempered parallel pin punch used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the Parallel Punch. Size 3/16in.
|
|
A hardened and tempered parallel pin punch used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the Parallel Punch. Size 3/32in.
|
|
A hardened and tempered parallel pin punch used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the Parallel Punch. Size 3/8in.
|
|
A hardened and tempered parallel pin punch used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the Parallel Punch. Size 5/16in.
|
|
A hardened and tempered parallel pin punch used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the Parallel Punch. Size 5/32in.
|
|
A hardened and tempered parallel pin punch used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the Parallel Punch. Size 7/32in.
|
|
Hexagonal bodied punches with extra long pins. Used for driving out long retaining pins. The Pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Size. 1/4in.
|
|
Hexagonal bodied punches with extra long pins. Used for driving out long retaining pins. The Pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Size. 1/8in.
|
|
Hexagonal bodied punches with extra long pins. Used for driving out long retaining pins. The Pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Size. 3/16in.
|
|
Hexagonal bodied punches with extra long pins. Used for driving out long retaining pins. The Pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Size. 5/32in.
|
|
Hexagonal bodied punches with extra long pins. Used for driving out long retaining pins. The Pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Size. 7/32in.
|
|
