Rustins Plastic Coating

Plastic Coating - Two-part clear cold cure lacquer for use on wood, hardboard, cork and plastic laminates. Extremely good adhesion, resistant to heat, solvents and abrasion. Can be burnished to a mirror like gloss or rubbed down to a smooth, satin finish with steel wool and wax. An excellent finish for marquetry as it does not darken light coloured veneers and does not yellow or craze on ageing. Hard-dry within 2 hours of application.

This kit includes 250ml Plastic Coating, 63ml Plastic Coating hardener, 63ml Burnishing Cream, 135ml Brush Cleaner

Contents are sufficient for 4sq metres coverage (one coat)

A two-part cold cure lacquer with excellent adhesion and durability. Almost colourless and will not craze or yellow on ageing. Resistant to scratching, abrasion, most solvents, weak acids and alkalis. Can be applied to wood, cork, chipboard, MDF, laminates, slate and stone. Re-coatable after 1-1.1/2 hours, floor can be used 2 hours after last coat has been applied.

Special blend of solvent thinners for use with Rustins Plastic Coating.

Special blend of solvent thinners for use with Rustins Plastic Coating.