Screw Sinks & Screw Diggers

Screwsinks are used for drilling, countersinking and counter-boring in one operation. The countersinking part can be slid up and down the drill part of the tool by means of a hexagon key to suit the depth of hole being drilled .

To ensure an accurate fit we suggest you use the corresponding plug cutter from the Faithfull range.

Each screwsink is supplied with a hexagon key.

Cuts Size 6

Screwsinks are used for drilling, countersinking and counter-boring in one operation. The countersinking part can be slid up and down the drill part of the tool by means of a hexagon key to suit the depth of hole being drilled .

To ensure an accurate fit we suggest you use the corresponding plug cutter from the Faithfull range.

Each screwsink is supplied with a hexagon key.

Cuts Size 8

Screwsinks are used for drilling, countersinking and counter-boring in one operation. The countersinking part can be slid up and down the drill part of the tool by means of a hexagon key to suit the depth of hole being drilled .

To ensure an accurate fit we suggest you use the corresponding plug cutter from the Faithfull range.

Each screwsink is supplied with a hexagon key.

Cuts Size 10

Screwsinks are used for drilling, countersinking and counter-boring in one operation. The countersinking part can be slid up and down the drill part of the tool by means of a hexagon key to suit the depth of hole being drilled .

To ensure an accurate fit we suggest you use the corresponding plug cutter from the Faithfull range.

Each screwsink is supplied with a hexagon key.

Cuts Size 12

Screwsinks are used for drilling, countersinking and counter-boring in one operation. The countersinking part can be slid up and down the drill part of the tool by means of a hexagon key to suit the depth of hole being drilled .

To ensure an accurate fit we suggest you use the corresponding plug cutter from the Faithfull range.

Each screwsink is supplied with a hexagon key.

Set of 4 Containing sizes 6 , 8 , 10 , and 12

Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool. Ideal for drilling, countersinking and counterboring in one operation. This means that a No.6 Screwdigger can be adjusted to predrill for different lengths of No. 6 Screw. Uses 3/32in Drill Bit. To ensure an accurate fit we suggest you use the same Plug Cutter from the Disston brand. For no 6 screw

Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool. Ideal for drilling, countersinking and counterboring in one operation. This means that a No.8 Screwdigger can be adjusted to predrill for different lengths of No. 8 Screw. Uses 7/64in Drill Bit. To ensure an accurate fit we suggest you use the same Plug Cutter from the Disston brand. For No 8 screw

Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool. Ideal for drilling, countersinking and counterboring in one operation. This means that a No.10 Screwdigger can be adjusted to predrill for different lengths of No. 10 Screw. Uses 1/8in Drill Bit. To ensure an accurate fit we suggest you use the same Plug Cutter from the Disston brand. For No 10 screw

Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool. For No 12 screw

Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool. This means, for example, that a No.8 Screwdigger can be adjusted to predrill for different lengths of No. 8 Screw. This set contains 1 each No. 6,8,10 & 12 screwdiggers.

A set of 2 screwdiggers and 2 plug cutters for number 8 and 10 countersunk woodscrews in a plastic wallet.

H.S.S Pilot Drill to suit the Disston DIS5207 counterbore/countersink. Drill Size: 3/32in. (For No.6 woodscrews)

H.S.S Pilot Drill to suit the Disston DIS5208 counterbore/countersink. Drill Size: 7/64in. (For No.8 woodscrews)

H.S.S Pilot Drill to suit the Disston DIS5209 counterbore/countersink. Drill Size: 1/8in. (For No.10 woodscrews)

H.S.S Pilot Drill to suit the Disston DIS5210 counterbore/countersink. Drill Size: 9/64in. (For No.12 woodscrews)