Torque Wrenches

Torque wrench according to DIN3122. With ratchet the torque wrench can be used for both tightening and final checking of the torque. Reversible with lever but only for right hand action for torque checking. Equipped with angular gauge for after tightening. Graduated in Nm and lbs/ft. Lockable setting. Accuracy +/- 4%. Satin finish, rubber handle. Degree scale for after tightening of cylinder heads. Nm range: 5, 25. Lbs/ft range: 4-18. Length: 277mm.

3/8in Square Drive Torque Wrench with flip reverse ratchet action, and Nm case scales with FT/LB or KG reference scales. Manufactured to conform to BS 6703/88. Covers 5-25nm (4-18ft/lb) with in-built angular gauge. Also suitable for 1/4in square drive sockets if used in conjunction with 3/8 female/ 1/4 male adaptor (380035). The unique angular gauge, for use after tightening stretch bolts, allows bolts to be tightened over and above a pre-set torque rating by so many degrees, e.g. 45. Both the torque and angular gauge can be set with the one tool. Supplied in robust oil resistant case.

3/8in Square Drive Torque Wrench with flip reverse ratchet action, and Nm case scales with FT/LB or KG reference scales. Manufactured to conform to BS 6703/88. Covers 20-110nm (16.80ft/lb) with in-built angular gauge. Also suitable for 1/4in square drive sockets if used in conjunction with 3/8 female/ 1/4 male adaptor (380035). The unique angular gauge, for use after tightening stretch bolts, allows bolts to be tightened over and above a pre-set torque rating by so many degrees, e.g. 45 both the torque and angular gauge can be set with the one tool. Supplied in robust oil resistant case.

1/2 in Square Torque Wrench with flip reverse ratchet action suitable for commercial and industrial applications from 40-210Nm (30-150 FT/LB), with in built angular gauge.Manufactured to conform to BS6703/88.

Features:
NM Base Scales with FT/LB or KG reference scales
Quality Satin Finish
Rubber Protective Collar
Locking Knob
Unique Angular Gauge, for use after tightening stretch bolts, which allows bolts to be tightened over and above a preset torque rating by so many degrees, e.g. both the torque and angular gauge can be set with the one tool.

Length. 470mm/18. 1/2in

Torque wrench according to DIN3122. Bi-directional torque wrench for left/right hand threads with push through square drive and flip reverse ratchet action for torque checking. Equipped with angular gauge for after tightening. Graduated in Nm and Ft/Lbs. Lockable setting. Accuracy: +/- 4%. Satin finish. Rubber handle. Range: 70-350Nm.

Torque wrench according to DIN3122. With ratchet the torque wrench can be used for both tightening and final checking of the torque. Reversible with lever, but only for right hand action for torque checking. Equipped with angular gauge for after tightening. Graduated in Nm and Ft/Lbs. Lockable setting. Accuracy: +/- 4%. Satin finish. Rubber handle. 3/4in square drive.

3/4in Square Torque Wrench with flip reverse ratchet action suitable for commercial and industrial applications from 140-700Nm (100-500 FT/LB), with in built angular gauge. Manufactured to conform to BS6703/88. Features: NM Base Scales with FT/LB or KG reference scales Quality Satin Finish Rubber Protective Collar Locking Knob Unique Angular Gauge, for use after tightening stretch bolts, which allows bolts to be tightened over and above a preset torque rating by so many degrees, e.g. both the torque and angular gauge can be set with the one tool. Length. 10650 mm /42in