Ref: CLE FAIPPSET8RH
Price:
£26.27
(Including VAT at 20%)
These punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes.
The pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch.
The set of eight punches include one of each of the following.
1.5mm , 2.5mm , 3.0mm , 4.0mm , 5.0mm , 5.5mm , 6.0mm ,and 8mm
(TIP Diameter x 4in long)
|
 |
Ref: CLE FAIPPSET8RHL
Price:
£33.84
(Including VAT at 20%)
Long series pin punch with extended parallel pin, used for the removal of tight pin and metal dowels from mechanical fittings and machinery.
Designed for heavy-duty use and are made from uniformly heat treated tool steel with a round head and a knurled body for a firm grip.
Type: Long series parallel pin punch.
Size: Set 8 1.5, 2.5, 3, 4, 5, 6, 8 and 10mm
Parallel Pin length: 90mm
Overall length: 200mm
|
|
Ref: CLE PRI135SET6
Price:
£28.10
(Including VAT at 20%)
A hardened and tempered parallel pin punch used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the Parallel Punch. Available as walleted set of 6 containing one of each of the following sizes. 1/16, 1/8, 3/16, 1/4, 5/16, and 3/8in.
|
|
Ref: CLE PRI135SET9
Price:
£40.14
(Including VAT at 20%)
A hardened and tempered parallel pin punch used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the Parallel Punch. Available as walleted set of 9 containing one of each of the following sizes. 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, and 3/8in.
|
|
Ref: CLE PRI145SET6
Price:
£32.96
(Including VAT at 20%)
Hexagonal bodied punches with extra long pins. Used for driving out long retaining pins. The Pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. A set of 6 hexagonal bodied punches with extra long pins. Walleted as a set containing one of each of the following sizes. 1/8in, 5/32in, 3/16in, 7/32in, 1/4in and 5/16in.
|
|
Ref: CLE STA418226
Price:
£27.46
(Including VAT at 20%)
Quality chrome vanadium steel increased strength and durability for retained accuracy when marking out centre lines, hole locations and pilot drill starting points. Quenched and tempered to precise specifications. 6 piece kit
|
|
Ref: CLE STRS248PC
Price:
£52.69
(Including VAT at 20%)
Extra long, they are hardened and tempered with a knurled grip. The drive pin sections are 90mm (3 1/2 Inch) long and the diameters of the punches are slightly under the sizes listed.
Length: 200mm / 8 Inch
Set of all sizes in case: (3mm / 1/8 Inch, 5mm / 3/16 Inch, 6mm / 1/4 Inch, 8mm / 5/16 Inch, 9.5mm / 3/8 Inch)
|
|
Ref: CLE STRS565PC
Price:
£62.78
(Including VAT at 20%)
Well proportioned, hardened and tempered with knurled finger grip.
Set of all sizes: (1.5mm (1/16 Inch), 2.5mm (3/32 Inch), 3mm (1/8 Inch), 4mm (5/32 Inch), 5mm (3/16 Inch), 5.5mm (7/32 Inch), 6mm (1/4 Inch), 8mm (5/16 Inch)).
Length: 100mm (4 Inch)
|
|
